Ejendals Tegera 494 Heat Resistant Neoprene Lab Gloves
The Ejendals Tegera 494 Heat Resistant Neoprene Lab Gloves are incredibly versatile neoprene gloves. Suitable for lab applications and metalwork, they have outstanding contact heat resistance and can protect against a selection of chemicals including some acids. Additionally, they are extra-long for protection of the lower forearm and are fitted with a thermal liner for use in cold as well as hot conditions.
Purchase Quantity
The Ejendals Tegera 494 Heat Resistant Neoprene Lab Gloves are supplied as a pair of gloves.
Sizing Information
These gloves are only available in size 10. You can check if this size will fit you by measuring the length and circumference of your hand then comparing your results to the sizing table below.
| Size | Circumference (mm) | Length (mm) |
| Size 10 | 254mm | 204mm |
Read our guide to sizing for more information about finding your perfect size.
How Do the Ejendals Tegera 494 Neoprene Lab Gloves Protect Your Hands?
Not only can the Tegera 494 gloves protect against a selection of chemicals (including certain acids like sodium hydroxide), they also offer heat, cold and good all round mechanical resistance. Made from resilient neoprene, they can withstand contact heat up to 500°C as well as small splashes of molten metals. On the opposite side of the spectrum, they are also suitable for cold environments as they are waterproof and feature a warming thermal liner.
Performance Ratings
EN 388 (Protection Against Mechanical Risks)
| Test | Result |
| Abrasion | Level 3 |
| Cut | Level X |
| Tear | Level 2 |
| Puncture | Level 2 |
| Blade Cut | Level C |
Read our guide to EN 388 for more information.
EN 374 (Chemical Resistance)
| Chemical | Permeation Level |
| Methanol | Level 1 |
| n-Heptane | Level 1 |
| Sodium Hydroxide (40%) | Level 6 |
| Sulphuric Acid (96%) | Level 2 |
| Sodium Hydroxide (40%) | Level 6 |
| Ammonium Hydroxide (25%) | Level 1 |
| Hydrogen Peroxide (30%) | Level 6 |
| Formaldehyde (37%) | Level 6 |
EN 407 (Protection Against Thermal Risks)
| Hazard | Resistance Rating |
| Burning | Level 3 |
| Contact Heat | Level 4 |
| Convective Heat | Level 3 |
| Radiant Heat | Level 3 |
| Molten Metal (Splashes) | Level 4 |
| Molten Metal (Large Quantities) | N/A |
EN 511 (Cold Resistance)
| Property | Resistance Level |
| Protection Against Convective Cold | Level 1 |
| Protection Against Contact Cold | Level 2 |
| Protection Against Water Penetration | Level 2 |
Key Features and Benefits
- Chemical-resistant neoprene lab gloves
- Resists contact heat up to 500°C
- Offers reliable protection against small splashes of molten metal
- Thermal lining keeps hands warm in cold conditions
- Extended cuff protects the wrist from injury
- Crinkle palm pattern enhances grip
- Latex-free for reduced irritation
Who Can Use the Tegera 494 Neoprene Lab Gloves?
With a robust, complex design that protects against heat, cold, chemicals and mechanical risks, they are well-suited for lab and metalwork applications. Due to their versatility however, they can benefit a number of industries and applications including:
How Long Are These Gloves?
To offer durable protection, these gloves are designed to fit a little looser than some other work gloves. They have an overall length of 450mm.
Materials
The 494 gloves are made of the following materials:
- Dipping Material: Neoprene
- Outer Material Specification: Chloroprene (100%)
- Inner Material Specification: Cotton (100%)
- Antibacterial/Biocidal Treatment: Pyrithione zinc (CAS number 13463-41-7)
Additional Documentation
