HexArmor PointGuard Ultra 9032 Needlestick Utility Gloves
If you're looking for reliable cut and needlestick protection, then look no further than the HexArmor PointGuard Ultra 9032 Needlestick Utility Gloves. Imbued with sanded, coarse nitrile palms for a superior grip in wet and oily conditions, the HexArmor Utility Gloves protect the fingers and palms against lacerations and needles with the highest protection available.
Purchase Quantity
The HexArmor PointGuard Ultra 9032 are supplied as a pair of gloves.
Sizing Information
The HexArmor PointGuard Ultra 9032 Gloves are available in a choice of sizes, which makes them suitable for most users. Please consult the table below for details, then select the required size from the drop-down menu at the top of the page.
| Size | Circumference (mm) | Length (mm) |
| Size 7 | 178mm | 170mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Read our guide to sizing for more information about finding your perfect size.
How Do the Portwest PointGuard Ultra 9032 Protect Your Hands?
Accidental and intentional injection with needles is a serious threat in a number of professions, including law enforcement, waste disposal and charity work. With the HexArmor PointGuard Ultra 9032 Utility Gloves, users can rely on their coarse nitrile palms layered with SuperFabric, providing both a high level of grip and some of the highest needlestick and cut-resistances available.
Performance Ratings
EN 388 (Protection Against Mechanical Risks)
| Test | Result |
| Abrasion | Level 4 |
| Cut | N/A |
| Tear | Level 4 |
| Puncture | Level 3 |
| Blade Cut | Level F |
Read our guide to EN 388 for more information.
Key Features and Benefits
- Highest needlestick and cut resistance available
- Constructed using robust layering of SuperFabric on vulnerable areas
- Passed ANSI/ISEA Cut Level A9 and Needlestick Level 5
- 15-gauge hi-vis polyester shell enhances visibility and worker compliance
- Protection from injection apertures ranging from .002" to .012" (0.05 to 0.3 mm)
- Protects against fluid-injection injuries up to 10.150 PSI (700 bar)
- Sandy nitrile 3/4 knuckle palm coating provides superior grip and water-resistance
- Knit wrist helps prevent dirt and debris from entering the glove
- Seamless construction allows enhanced comfort and breathability
- Available in a range of sizes for universal fit
Who Can Use the HexArmor Needlestick Utility Gloves?
The HexArmor Needlestick Gloves are intended for conditions where there is a risk of contact with needles, as well as cuts or abrasions. They can therefore perform well as:
Additional Documentation
