Delta Plus Hercule VV750 Nitrile Coated Thermal Work Gloves
Gloves that provide thermal insulation and contact cold protection often prevent the performance of tricky, dexterous tasks because of excess padding. Delta Plus Hercule VV750 Nitrile Coated Thermal Work Gloves give you the best of both worlds. Complete with across-the-board EN 388 mechanical hazard protection and Level 2 contact cold resistance, Delta Plus VV750 Gloves remain lightweight and slender, allowing for the completion of dexterous and accurate tasks.
What's Included?
Sizing of the VV750 Thermal Nitrile Coated Work Gloves
To find your perfect size, simply measure the circumference of your palm (ignoring the thumb area) and the length of your hand as indicated in the image below. Once you have your measurements, please consult the sizing chart below to find the correct size for your hand.
| Glove Size | Hand Circumference (mm) | Hand Length (mm) |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
For more information on glove sizing, click here to view our comprehensive guide
Key Features and Benefits of the Hercule VV750 Thermal Nitrile Coated Work Gloves
- Three quarter coating ensures full protection of fingers against cold and water
- Fully EN 388 compliant for protection against mechanical hazards
- Inside acrylic support keeps hands warm in cold conditions
- Three-quarter nitrile coating on back allows hand to breath and release odour naturally
- Outside polyamide support provides high flexibility
- Easily hand washable to keep them hygienic for longer
- Highly dexterous and suitable even for fine handling
- Available in two different sizes
Applications of the VV750 Thermal Work Gloves
Delta Plus Hercule VV750 Thermal Nitrile Coated Work Gloves are fit for use in an array of light to medium risk workplace applications. Some of the most suitable industries and tasks include:
Protective Ratings
EN 388
EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves' performance when used whilst working in and around mechanical machinery by measuring abrasion, cut, tear and puncture resistance.
| Hazard | Resistance Rating |
| Abrasion Resistance | Level 3 |
| Cut Resistance | Level 2 |
| Tear Resistance | Level 3 |
| Puncture Resistance | Level 1 |
| ISO Cut Resistance | N/A |
Still confused? Click here for more information on all things EN 388
EN 511
EN 511 governs the sale of gloves that provide cold weather protection. There are a range of tests involved, as detailed in the table below. Please view the information beneath to see how Delta Plus VV750 Gloves performed when tested:
| Hazard | Resistance Rating |
| Convective cold Resistance | N/A |
| Contact cold Resistance | Level 2 |
| Water Permeability Resistance | N/A |
Benefits of a Nitrile Coating
Nitrile is a super flexible coating that provides resistance to oil, fuel and chemicals. Nitrile is used as a protective coating in gloves because it matches the pliability of latex with the hazard and injury protection properties of a heavier, woven glove. It excels in damp environments where tiny air bubbles inside it can suck up molecules and droplets, enhancing grip strength.
Materials Used to Make Delta Plus VV750 Thermal Work Gloves
- Outside: Polyamide gauge 13 (100%)
- Inside: Acrylic gauge 7 (100%)
- Support: Polyamide/acrylic
- Coating: Nitrile foam
- Palm and Finger Coating: Nitrile
Documentation
